
XVape Fog Pro – convection with a stirring tool in the base
The XVape Fog Pro comes from the XMax family and uses true convection: Hot air flows through the material instead of heating it through the chamber wall. Set the temperature precisely from 100 to 220 °C, with an OLED display, a magnetic flip-top lid, and a stirring tool stored in the base of the device. In this collection, you’ll find the device and matching XVape Fog Pro accessories: a mouthpiece, stainless steel screen, ceramic tip, and wax cup.
Check the generation: This mouthpiece and screen are for the Fog Pro; the original XVape Fog has its own parts. The exception is the ceramic mouthpiece tip—it fits the Fog and Fog Pro, as well as the XMax Ace and Starry 4. The 10 mm stainless steel screen is the part most often replaced. The Fog Pro comes with a concentrate container, while the stainless steel wax cup is the durable alternative for regular extract sessions.

Convection, precise temperature control, replaceable battery
The Fog Pro takes less than 30 seconds to vibrate and signal that it has reached the target temperature. You can set it in one-degree increments between 100 and 220 °C, and the OLED display shows the temperature, battery level, and session timer. Open the chamber using a magnetic flip-top lid; the stirring tool for loosening the material is conveniently stored in the base. The mouthpiece is made of zirconium, and the housing is made of anodized aluminum. The replaceable 18650 battery has a capacity of 3200 mAh—the largest among the XMax and XVape devices we carry. It charges via USB-C and switches off automatically after ten minutes. At 4.4 × 2.6 × 10 cm and 149 g, it feels solid in your hand.
For the XVape Fog Pro
XVape Fog Pro Replacement Parts Compared
The Fog Pro mouthpiece is the complete top section: screen, cooling unit, silicone cover, and zirconium mouthpiece, all magnetic and ready to fit. It's worth getting if the cooling unit is worn or as a second unit to use while cleaning the first. For regular maintenance, the Fog Pro stainless steel screen with a 10 mm diameter is all you need: soak it in isopropyl alcohol, rinse, let it dry, and put it back in. Replace it only if residue is stuck on or it's deformed. The ceramic mouthpiece tip is just the tip without the cooling unit, ideal as a spare or if the old one is worn out.

Concentrates without a gummed-up chamber
Concentrates tend to stick to the chamber walls, and with a convection device, you'll want to keep the airpath clean. The Fog Pro wax cup, made of durable stainless steel, solves the problem: fill it with a small amount of wax, oil, or extract, place it in the heating chamber, and set the temperature high. Then clean it with isopropyl alcohol, preferably while it's still warm. Simply remove it when using herbs. The Fog Pro also comes with a USB-C cable, concentrate container, cleaning brush, cotton swabs, alcohol wipes, and two replacement O-rings, so with a screen and mouthpiece from this collection, you're all set for a long time.
Whether you're getting a new XVape Fog Pro or replacing the screen, mouthpiece, and wax cup, you'll find everything you need here. Find all the brand's devices in the XMax Vaporizer & Accessories collection, and see how it compares with the other models in the XMax Vaporizer Guide.